新闻资讯
NEWS
/
/
6v dc motor manufacturers take you to understand the industry application of DC gear motors
NEWS NEWS

CONTACT US

1

0086-755-84019605

1

0086-755-89342809

6v dc motor manufacturers take you to understand the industry application of DC gear motors

  • Categories:INDUSTRY NEWS
  • Author:
  • Origin:
  • Time of issue:2022-02-16
  • Views:0

6v dc motor manufacturers take you to understand the industry application of DC gear motors

The 6v dc motor manufacturer tells you that in order to ensure the high-efficiency operation of the motor, the micro DC gear motor needs to be changed every time the oil is used for a period of time. When changing the oil, you need to operate correctly according to the instructions. The following 6v dc motor manufacturer will introduce this type of motor to you. Correct oil change steps:

good price and quality 6v dc motor
1. The 6v dc motor manufacturer tells you that when the motor is stopped to check the oil level, it is necessary to cut off the power supply to prevent electric shock, then wait for the motor to cool down, then remove the oil level plug and check whether the oil is full.
2. Install the oil level plug.
3. When changing the oil, because the viscosity of the oil increases after cooling, it is difficult to drain the oil, so we should change the oil at the operating temperature.
4. The 6v dc motor manufacturer tells you to put an oil pan under the oil drain plug, and open the oil level plug, breather and oil drain plug.
5. The 6v dc motor manufacturer tells you to remove all the oil.
6. Install the oil drain plug and inject new oil of the same brand. It should be noted that the oil quantity should be consistent with the installation position.
7. The 6v dc motor manufacturer tells you to check the oil level and tighten the oil level plug and breather.

Copyright ©Etonm Motor Co., Limited.  粤ICP备15002344号    SEO Tab Navigation